Original research asset

Golf Simulator Room & Placement Index

This index compares the geometry that determines whether a launch monitor or enclosure can work in a real room: mounting height, monitor-to-ball position, screen-to-ball distance, room width/depth guidance, enclosure dimensions and hitting-area requirements.

Source rule: every row is tied to current manufacturer product pages, support documentation, manuals or enclosure specification sheets reviewed for the site. General planning guidance stays clearly separated from exact-model requirements.
Current records

8

Launch-monitor and enclosure records with direct manufacturer sources.

Overhead systems

1

Models where ceiling height and mounting geometry are primary constraints.

Enclosure records

3

Actual outer dimensions and viewable screen dimensions where published.

Source-backed comparison table

Brand / modelTypePhysical dimensionsPlacementRoom guidanceHitting area / screenSource
Uneekor
EYE XO
Overhead camera launch monitor 2.5 H × 30.5 W × 6.0 L in; 12 lb Mount 3.5 ft in front of tee; sensor height 9–10 ft; product page lists 10 ft optimal Uneekor recommends at least 13 ft room width for full driver swings; 15 ft for golfers 6 ft+; screen-to-tee recommended 12 ft, minimum 10 ft may suffice 16 L × 12 W in Uneekor product page
Uneekor
EYE MINI
Portable camera launch monitor 15.8 H × 6.5 W × 6.6 L in Floor/side-mounted portable unit; use current Uneekor setup guidance for hitting-area placement Room swing clearance depends on golfer; Uneekor general setup guidance recommends 13 ft width, 15 ft for golfers 6 ft+ See current product/setup guidance Uneekor product page
Garmin
Approach R10
Radar launch monitor Portable tripod-mounted unit 6–8 ft behind ball indoors; ball at least 8 ft from net/screen; 2 × 2 ft hitting area begins 6 ft from monitor Garmin support lists minimum indoor space 15 ft long × 8 ft wide × 8 ft high At least 2 × 2 ft mat/hitting space Garmin support
Garmin
Approach R50
Camera launch monitor / simulator display Portable floor unit Approximately 1.5 ft to side of tee; face tee; approximately same height as tee Garmin requires adequate ceiling height and full swing clearance; no universal room dimensions in current placement manual At least 2 × 2 ft hitting space per current support guidance Garmin R50 manual
SKYTRAK
SKYTRAK+
Photometric + radar launch monitor See current SKYTRAK technical specification page Designed to minimize space needed behind tee; use current product/setup guidance Current product page lists studio options: 8 ft W × 7 ft 5 in H × 4 ft D; 10 ft W × 8 ft 6 in H × 5 ft 4 in D; 12 ft W × 8 ft 6 in H × 5 ft 4 in D; 13 ft W × 10 ft H × 10 ft D Side-of-ball launch-monitor setup SKYTRAK product page
Carl's Place
Pro Enclosure 8 × 10.5
Golf simulator enclosure 102 H × 132.4 W in overall; available in 69.5, 105.5, 129.5 and 189.5 in standard depths Rear fitting requires at least 9.5 in; 12 in rear buffer recommended Room must exceed enclosure outer dimensions plus rear buffer and golfer swing area Viewable screen 90.3 H × 120.4 W in; 150.5 in diagonal Carl's Place Pro specs
Carl's Place
Pro Enclosure 8.5 × 14.5
Golf simulator enclosure 107 H × 181.8 W in overall; standard depths available separately Rear fitting requires at least 9.5 in; 12 in rear buffer recommended Room must exceed enclosure outer dimensions plus rear buffer and golfer swing area Viewable screen 95.5 H × 169.8 W in; 194.8 in diagonal Carl's Place Pro specs
Carl's Place
Pro Enclosure 10 × 15.5
Golf simulator enclosure 123 H × 190.3 W in overall Rear fitting requires at least 9.5 in; 12 in rear buffer recommended Room must exceed enclosure outer dimensions plus rear buffer and golfer swing area Viewable screen 111.4 H × 178.3 W in; 210.3 in diagonal Carl's Place Pro specs

Why this data matters

Two launch monitors at similar prices can impose completely different room requirements. Radar systems may need several feet behind the ball. Side-camera systems can reduce rear depth but use lateral space. Overhead systems clear the floor but can require a specific ceiling and mount height.

Likewise, an enclosure's nominal listing size may not equal its actual outside frame dimensions. Room planning should use published outer dimensions plus any manufacturer-required rear buffer.

Use the index with the planning tools

Room-size calculator

Compare measured room width, depth and ceiling height with common planning thresholds.

Open calculator →

Launch-monitor placement checker

Compare radar, side-camera and overhead placement styles with your available room geometry.

Open checker →

Projector throw calculator

Estimate lens-to-screen distance from screen image width and projector throw ratio.

Open calculator →

Methodology

GolfSimulatorVerdicts preserves the manufacturer's own placement language. We do not convert a general room recommendation into a fake exact-model minimum, and we do not infer unpublished measurements from retailer listings.

Read the full methodology →